Types of Plywood – For those of you who are not familiar with plywood, this material is made from hot-pressed resin-coated veneer pieces. Although it sounds easy, things get a little more complicated when you are faced with choosing the right type and thickness of plywood for a job. We must know the safety and strength requirements of each finished product, knowledge is needed to choose the right type of plywood.
Because Indonesia has several variants of plywood types, so here Mega Plywood Indonesia will give some tips for choosing plywood for your project.
Plywood Grading and Rating
In addition to thickness, plywood classification can be seen from its appearance and condition. It is good plywood, looks like the front side is usually taller, and thus will be more attractive, than the back.
In general, grade “A” plywood has few defects, making it suitable for painting, while grade “D” plywood has many holes and repairs. Indonesian Mega Plywood plywood is classified as “A”, it has passed the feasibility test.
Plywood for Furniture
Types of Plywood – Many furniture fronts use plywood, such as drawer fronts and cabinet tops. High-quality plywood can provide an attractive finish. Most cabinet construction uses plywood, for the inside it is usually cheaper and makes the finishing somewhat lighter. Low-end veneers are great for interior areas, where appearance doesn’t matter. The sides of the drawer need only “thick plywood, and the bottom of the drawer only needs” thick plywood.
The Right Plywood for Floors
Plywood plays an important role in ensuring a safe and durable floor. The floor consists of many different layers. The finished solid floor is on top, next to the undercoat providing the necessary smooth surface for attaching the top.
These different surfaces require different undercoats, but all undercoats must be a thin but strong layer upon which the finished floor surface is laid. Floor underlayment usually uses 5/8” plywood. Under the underlayment is the subfloor, which requires the use of a thicker product, perhaps more if the distance between the floor joists is large.
Plywood for Wall
Use special exterior plywood, as walls are very susceptible to weather exposure which is a concern. Interior plywood is not waterproof and its use in outdoor applications can result in serious building problems. In addition, exposure to the weather seriously compromises the integrity of the material, causing collapse and weakness that can cause serious damage.
The plywood used to coat the frame of the house does more than just provide a surface on which to install wall cladding inside the house. It also makes the structure stronger by linking everything together. In addition, structures with walls connected only to the plywood sheath require thicker plywood. If the lining is installed on the studs, then the thickness is not too much of an issue. For buildings with walls attached only to the IRC sheath, plywood is required.”
The Right Plywood for the Roof
Spend a little more money, and use plywood to make a more durable and safer roof. Plywood that is only 3/8” thick often does not support someone working on the roof, especially if the roof is large or has a lot of space between the truss and the rafters. Handling heavier loads is also important in high snow areas.
Types of Plywood – Consider the requirements of the finished product when selecting plywood thickness. The same applies to construction. Choose a supplier with good credit when you want to buy plywood. Mega Plywood Indonesia is one of the exporters of Indonesian plywood. Have various types of quality plywood at the best prices.
Hopefully this article can be useful.
Komentar Terbaru