Plywood Exporter – You need to know if hard plywood is produced by gluing several layers of wood together.The face and back veneers are made of hardwood, which comes from deciduous trees such as birch, oak, mahogany, maple, teak, and beech. As for the core, it depends on the manufacturer and the type of plywood, as the core can be made from any type of material, including softwood, hardwood, particleboard, or MDF (medium-density fiberboard).

Advantages of Hardwood Plywood

Plywood is an inexpensive alternative to traditional solid wood products and is also available in many grains, species, and grades.

Indonesian hardwood plywood is Known for its good strength and durability, it is less likely to warp than softwood plywood. Hardwood plywood usually comes in a variety of thicknesses and is available in large sheets, with the most common being 4-x 8-foot, followed by 5-x 5-foot. Finished plywood after pre-sanding, can be used immediately. Of course for smooth and flat surfaces, this is very efficient. This type of hardwood plywood has a finished look, making it perfect for making cabinets, furniture, and other projects visible.

Disadvantages of Hardwood Plywood

Plywood Exporter – There is a slight drawback to this plywood because of its thin layer, plywood will be difficult to cut because it is prone to breakage. Sanding must be done carefully to ensure that when sanding, it does not expose the core.

Delamination, which occurs when layers of veneer are held together with separate glue, can be another problem. Delamination itself is caused by improper manufacture, humidity, extreme heat, and pressure from nails and screws inserted close to the edges of the plywood.

Best Use for Hardwood Plywood

The use of this plywood in residential construction is usually used as cabinets, furniture, decks, walls, floors, and roofs. Although plywood can be a money saver, before buying it is a good idea to choose the right type of plywood it is very important. If for furniture, cabinets, and interior finishing that will be visible, then use plywood with good quality and thickness of the facial veneer.

Although many woodworkers swear by veneer core hardwood plywood for its structural strength and stability, composite cores such as particleboard and MDF are preferred for professional cabinet making because they produce a smoother, thicker surface and are less likely to warp.

If you are using a type of plywood for a project that is useful for supporting loads or will be exposed to the elements, it is a good idea to look for plywood with more layers, as plywood with multiple layers will result in a thicker and stronger board. Such 3 layers are one of the most common types of plywood used indoors. While 5 layers are used indoors or outdoors, they are not suitable for framing permanent structures such as warehouses or houses. There’s more Multi-ply plywood that has at least seven or more layers. This plywood is strong and durable enough for use in roofing, framing, and other outdoor projects.

Plywood is a strong and economical building material. Let Mega Plywood Indonesia assist you in choosing the right type of plywood for your needs. We are one of the professional and legal Indonesian plywood exporters. With a wide selection of Indonesian hardwood plywood, we will ensure your project will last a long time.