Indonesian Plywood Exporter – Plywood is a non-native wood material that is a staple used in many home-building projects due to its strength and low cost. It’s important to be able to understand the different grades of plywood, so you can choose the best material for your job.
The following Mega Plywood Indonesia will provide information about plywood grades that may be useful for you:

Plywood grade:


For softwood plywood grades, each veneer has two grades, for the first veneer to be “face” and the other to be “back” veneer. Softwood types are also divided into four plywood veneer classes: A, B, C, and D.

Class A. plywood

Is the type with the best quality and at a higher cost. However, this type of wood can save project time, because this type of plywood is smooth and easy to paint.

Class B. plywood plywood

For this type, there are usually minor defects that may require minor repairs. This makes the wood a little less smooth but still looks good.

Class C plywood

In the wood, there are more visible defects and knots, usually up to 1.5 inches in diameter.

D-grade plywood

This latter class has a large defect and a knot with a diameter of 2.5 inches. Usually, this type of plywood is the cheapest class of plywood-veneer.


For a hardwood grading system similar to softwood, the face veneer is graded with letters, and “A” is the highest quality while “D” is the lowest quality. However, there are different grading standards for hard plywood on the back: usually use a number where “1” is the best and “4” is the worst.

For hardwood plywood A1 represents the highest quality type of plywood, while D4 plywood is the lowest quality (But cost-effective).

Which Plywood Grade is right for My project?

Indonesian Plywood Exporter – Mega Plywood Indonesia will answer this question. It all comes back to you, depending on what project you are working on. If the project is being worked on both sides of the plywood visible, then choosing A1, A2, B1, or B2 is the right choice. But, if the back is not visible, you can use A4 or B4 as a good alternative.

If you plan to complete the project, then the choice of class A1 or A2 is the best. If the plywood is going to be painted, use grade B or lower which is suitable for the surface, and A3 or lower is suitable for the back.

Are you planning on using plywood for an outdoor project such as a deck, roof, or shed? Be sure to use a type of wood that is resistant to moisture. If the plywood has an X on the end, it means it can withstand some exposure to moisture.

You can also use marine-grade plywood, this type is very resistant to moisture and even has a waterproof coating.
This type is also commonly used as a water tank structure and ship hull that will be exposed to water for a long time.

While this grading system can be a useful guide when balancing cost and quality, it’s worth remembering to always inspect the plywood product in person to determine whether the grain pattern, flatness, and edges meet your project requirements. If you are not sure what grade is right for your needs, you can consult with Mega Plywood Indonesia. Our team of experts can assist you in selecting the best product for your next project. We also provide various types of Indonesian plywood at the best prices.